American Sprinkler Repair is a full service lawn sprinkler repair company serving Flower Mound, Texas.

Replaced Leaking valve

Tested system

Replaced leaking valve

Tested system, dug up, repaired and buried 1/2” lateral line leaks on zones 2 and 5, replaced 5 rotary heads and 7 spray heads that were broken/leaking, adjusted with proper height and nozzle, located DCA in front flower bed, checked and adjusted entire system with 7 stations, everything working as per design.

Located and repaired cut wire to zone 4, rebuilt 1” master valve that was leaking constantly causing a wet spot in lawn and could have cause an increment in water bill.

Replacing a couple rain bird spray heads on a well taken care of toro system

Replacing this 1” irritrol jar top valve and using water proof wire connections

Repairing a zone line that came apart at the fittings due to improper gluing

Installing this controller and replacing spray heads

Replacing this spray head after first breaking out this concrete carefully

Replaced faulty controller, set controller for proper watering schedule, replaced 6 spray heads that were broken/no popping up, adjusted with proper height and nozzle, dug up, repaired and buried 1/2” lateral line leak on zone 4, adjusted spray heads to water in right direction, checked and adjusted entire system with 6 stations.

Rebuilt 1” valve in backyard that was leaking constantly causing a wet spot in lawn and could have cause an increment in water bill, changed out one broken nozzle, checked and adjusted entire system with 9 stations.

Tested system, rebuilt 1” valve on zone 4 that was not coming all the way on, dug up, repaired and buried 3/4” lateral line leak on zone 3, replaced 5 rotary heads and 5 spray heads that were broken/not turning/leaking, adjusted with proper height and nozzle, adjusted spray heads and rotary heads to water in right direction, checked and adjusted entire system with 12 stations.

Rebuilt four 1” valves on stations 1, 2, 3 and 4 that were not coming on, changed out one nozzle that was not working, checked and adjusted entire system with 8 stations.

Tested system, dug up, repaired and buried 3/4” lateral line leak on zone 5, had to rerouted line due leak was cause per tree roots, replaced one spray head that was not popping up, changed out couple of nozzles for better coverage, adjusted spray heads and rotary heads to water in right direction, checked and adjusted entire system with 5 stations.

Repairing cut drip line using 17 mm fittings

Spring start up on a 1” RPZ

Spring start up on an RPZ that is under this rock

Spring start up on a Wilkins RPZ backflow

Repaired bad wire connections for zone 18, I then tested the zone to ensure that the sprinklers were working properly.

Spring start up on a Wilkins PVB with insulation and rock for appearance and protection

Replacing a spray head and a section of pipe that was installed incorrectly here and came apart

I was called to a home to repair a sprinkler system, I arrived at the home and began by inspecting the entire system, checking for any leaks or damage. I then moved one spray head on zone 6 to improve coverage. I also adjusted the entire system, making sure that all the sprinklers were working properly. I tested the system thoroughly to ensure that it was working correctly before leaving the home.

Dug up, repaired and buried 3/4” lateral line leak in backyard by back fence.

Located and repaired cut wires to zones 4 and 5, repaired 1 1/4” main line leak that was previously dug up per homeowner, dug up, repaired and buried multiple lateral line leaks on zones 8 and 9, replaced broken heads as needed, cleaned up several clogged nozzles, adjusted spray heads and rotary heads to spray in right direction, checked and adjusted entire system with 9 stations.