American Sprinkler Repair is a full service lawn sprinkler repair company serving The Colony, Texas.

Checking for a mainline leak on a very old system

Repairing a broken zone line with spears fittings

Installing a new multi conductor wire for 7 zones on a Rachio system

Rebuilt 1” master valve that was showing p err on controller screen, tested system, adjusted spray heads to water in right direction, cleaned up couple of clogged nozzles, set controller for proper watering schedule, checked and adjusted entire system with 9 stations.

Replacing the master valve on a Rain bird system

Reattaching a rain bird 1800 spray head with a rain bird 10 ‘ half nozzle

Using a 4” Sam spray head at the end of a zone by the sidewalk

Replaced 1” valve on zone 6 per customer request, ran new wire from controller to valve six, extended capped off line on zone 5 per customer request.

Tested system, replaced 38 spray heads that were broken/sticking up/leaking, adjusted with proper height and nozzle, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, checked and adjusted entire system with 9 stations.

Replaced 1” valve in frontyard that was seeping constantly causing two wet spot in lawn and could have cause an increment in water bill, dug up, repaired and buried 1” lateral line leak on zone 6, replaced 3 broken heads, adjusted with proper height and nozzle.

Replaced 1” valve on zone 4 that was not coming on, did not check system per customer.

Replaced 1” master valve that was leaking constantly causing a wet spot in lawn and could have cause an increment in water bill,

Repaired cut wire to master valve, tested system, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, replaced one spray head that was leaking in backyard which was provided per customer, checked and adjusted entire system with 7 stations.

Replaced 1” valve in backyard that had a crack right in front of valve, dug up, repaired and buried 3/4” min line leak in backyard that was leaking constantly causing a wet spot in lawn and could have cause an increment in water bill, had to cut line in top of leak to be able to repair brake on main line, checked water meter for water usage, after repairs, no leaks observed on sprinkler main line nor house line, did not check system per customer.

Repaired drip line leaks on zones 8 and 9, removed some drip lines on zone 9 to avoid over watering in certain areas, advised customer to fill up low spot in back flower bed, replaced one spray head on zone 6 that was not popping up, raised up one spray head on zone 7, checked and adjusted entire system with 12 stations.

Installed 1” DCA that was missing, checked operation of the same, split up station 2 to increase coverage in whole front yard, capped off two spray heads on zone 1, added one spray head on zone 2 and one more on zone 3 for better coverage, moved two spray heads on zone 2 for proper coverage, checked and adjusted entire system.

Repairing a leak in the mainline on a Rain bird system

Tested system, replaced one broken nozzle on zone 2, tested system, zone 2 needs to be split up, it have way too many heads and also once is split up one head need to be added at Conner of the house for better coverage, stations 3 and 5 have the spray heads about a foot away from street curb and they need to be move close to curb for better coverage, customer doesn’t want to move the heads for now, no signs of DCA found in property, DCA needs to be install before doing any repairs, checked entire system.

Repairing foundation drip line where a fiber optic install has cut the drip line

Raising spray heads for an orbit system

Repairing a leak in the mainline on a Rain dial system

Replaced one broken head that was provided per customer, checked all 3 stations.

Replaced two 1” valves on zones 2 and 8 that were showing error message on hunter controller screen, cleaned up couple of clogged nozzles, checked and adjusted all 9 working stations.

Added one spray head on zone 6 for better coverage, cleaned up couple of clogged nozzles, adjusted spray heads and rotary heads to water in right direction, checked and adjusted entire system with 6 stations.