American Sprinkler Repair is a full service lawn sprinkler repair company serving Coppell, Texas.

Tested system, dug up, repaired and buried 1/2” lateral line leak on zone 1 by driveway, installed spray head on flexible pipe to avoid future damage per cars running over spray head, replaced 5 spray heads and 6 rotary heads that were broken/not working/leaking, adjusted with proper height and nozzle, cleaned up couple of clogged nozzles, adjusted spray heads and rotary heads to water in right direction, checked and adjusted entire system with 8 stations.

Tested system, replaced 5 spray heads that were broken/leaking, adjusted with proper height and nozzle, turned off one spray head on zone 2 per customer request, cleaned up couple of clogged nozzles, checked and adjusted entire system with 5 stations.

Located and repaired cut wire to zone 3 that was damage when new internet cable was install, tested system, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, checked and adjusted entire system with 6 stations.

Replaced 1” valve on zone 5 that was leaking constantly had to cut main line to be able to repair leaking valve under warranty.

Evaluated system, customer request an estimate to replaced about 30 heads for low pressure heads in order to increase coverage also to move two spray heads to increase coverage, cleaned up couple of clogged nozzles, checked entire system with 4 stations.

Dug up, repaired and buried 3/4” lateral line leak on zone 8 had to move head a few feet due tree roots, tested system, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, checked and adjusted entire system with 8 stations.

Tested system, dug up, repaired and buried 1/2” lateral line leak on zone 1, replaced two broken heads, adjusted with proper height and nozzle, changed out all spray heads on zone 5 for low pressure heads in order to increase coverage in backyard, checked and adjusted entire system with 6 stations.

Tested system, dug up, repaired and buried 1/2” lateral line leaks on zones 2, 3 and 8, replaced 4 spray heads that were broken/not working/not popping up, adjusted with proper height and nozzle, raised up one spray head per customer request, cleaned up couple of clogged nozzle, adjusted spray heads to water in right direction, checked and adjusted entire system with 10 stations.

Replaced bad modules on hunter controller for stations 5, 6, 7 and 8 that were not coming on, tested system, rebuilt 1” valves on zones 3 and 7 that were running with all others stations, replaced 9 rotary heads that were not turning/working correctly, adjusted with proper height and nozzle, replaced one spray head on zone 5 for taller head in front flower bed for good coverage of grass area, changed out one nozzle on zone 7 to increase coverage by mail box, checked and adjusted entire system with 8 stations.

Tested system, replaced 5 spray heads that were broken/not popping/not working, adjusted with proper height and nozzle, dug up, repaired and buried 1/2” lateral line leak on zone 4 between tree roots in front yard by big tree, cleaned up couple of clogged nozzles, straightened up one spray head on zone 8, adjusted spray heads to water in right direction, checked and adjusted entire system with 11 stations.

Tested system, replaced 1” valves on zones 2 and 3 that were not coming on randomly, replaced 6 rotary heads on zone 3 for low pressure heads instead in order to increase coverage, uncapped two spray heads on zones 2 and 5, changed out 3 nozzles on zone 7 to avoid water on street as less as possible, adjusted rotary heads and spray heads to water in right direction, checked and adjusted entire system with 7 working stations.

Tested system, replaced 1” valves on zones 7 and 8 that were running with all others stations, replaced one broken head, adjusted with proper height and nozzle, checked and adjusted entire system with 8 stations.

Raised and replaced 4 spray heads on zones 1, 3 and 8 that were pointed out per customer.

Tested system, located and repaired cut wires to zone 5 using an add-a-zone connected to zone 6, raised up and replaced 14 spray heads heads that were broken/not popping up/leaking/missing, adjusted with proper height and nozzle, straightened up couple of heads in front yard, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, set controller for proper watering schedule, checked and adjusted entire system with 6 stations.

Replaced one broken rotary head on zone 5.

Dug up, repaired and buried 3/4” lateral line leaks in backyard on zone 4, turned off 3 spray heads on zone 8 per customer request.

Tested system, replaced all 12 spray heads on zone 3 for low pressure heads in order to increase coverage in front lawn, replaced one broken head on zone 5, adjusted with proper height and nozzle, changed out one nozzle on zone 5 for proper coverage, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, set controller for proper watering schedule, checked and adjusted entire system with 6 stations.

Rebuilt 1” valve on zone 9 that was shorted out and not coming on, tested system, replaced 3 broken heads, adjusted with proper height and nozzle, rebuilt 1” valve on zone 4 that got stuck on while testing system, changed out one nozzle on zone 10 to avoid water on back patio, checked and adjusted entire system with 11 stations.

Customer had a leak in the back. Leak was due to bent pipe underground. Fixed pipe segment up to fittings. Waited for glue to settle before testing. Checked system before handoff.

Customer wanted checkup of system. Stations 2 and 3 are overall muddy. Overwatering likely. Configured controller for half the time between zones at two starting times. One head was too low. Raised head. One ESP module was bad at the controller for stations 11-13. Replaced module. Checked system before handoff.

Located and replaced 1” valve on zone 3 that was not coming on, located and repaired cut wires to zones 5 and 10 using add-a-zone devices connected to zones 2 and 4, replaced missing valve box lid for valves on zones 2 and 10, replaced broken head on zone 1, stations 8 and 9 are capped off, checked entire system with 8 working stations.

Replaced controller that was provided per customer, set controller for season, rebuilt 1” valve on zone 5 that was not coming on, repaired 2 rotary heads and two spray heads using some parts that customer provided, customer will replaced spray heads on zones 3 and 4 himself, checked entire system with 5 stations.

Tested system, replaced two broken heads, adjusted with proper height and nozzle, changed out two nozzles on zone 5 for proper coverage, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, set controller for season and following current watering restrictions, checked and adjusted entire system with 6 stations.

Replaced 1” valves on zones 3 and 4 that were leaking constantly causing a wet spot in front yard near tree and could have cause an increment in water bill, tested system, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, checked and adjusted entire system with 6 stations.

Tested system, disconnected rain sensor per customer request, replaced 4 spray heads that were leaking/not working/no popping up, adjusted with proper height and nozzle, dug up, repaired and buried drip line leak on zone 2, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, did not replace sticking up heads per customer, advised customer to move firewood rack due one spray head is underneath it, checked and adjusted entire system.