American Sprinkler Repair is a full service lawn sprinkler repair company serving Denton, Texas.

Tested system, replaced few broken heads, adjusted with proper height and nozzle, repaired drip line leaks on zone 1, set controller for season, checked and adjusted entire system with 4 stations.

Located and installed missing valve box on valves for zones 4 and 6, replaced all spray heads on zone 4 for low pressure heads in order to increase pressure and coverage, replaced two pray heads on zone 3 that were not popping up/broken, adjusted with proper height and nozzle, one rotary head in backyard was disconnected per others, there’s also one more station that is not connected to system and leaks when valve is on manually, checked and adjusted entire system with 6 stations.

Rebuilt 1” valve on zone 3 that was not coming on, replaced two broken heads on zones 1 and 2, adjusted with proper height and nozzle.

Customer had solenoid from master valve blown off from valve from pressure. Replaced valve internals. Checked system and found one head to replace. Replace head and nozzle. Tested system before handoff.

Evaluated system, customer wants to install drip lines around foundation, pressure is not enough to run one single station for whole house, need to foundation stations, one for front and one for back, we will work on estimate and send it out later on via email.

Dug up, repaired and buried 1” main line leak on left side of house that was damage when taking out bushes on left side of back yard, replaced faulty auto drain valve at PVB

Replaced bad Hunter module for stations 5, 6 and 7, checked entire system with 7 stations.

Tested system, dug up, repaired and buried 3/4” lateral line leak on zone 2 right besides tree in front yard that was damage per tree roots, repaired several drip line leaks on zone 1, checked and adjusted entire system with 8 stations.

Tested system, located and replaced 1” valve on zone 5 that was not coming on, replaced 7 rotary heads and 4 spray heads that were broken/not working/leaking, adjusted with proper height and nozzle, raised up couple of heads that were too low, cleaned up couple of clogged nozzle, adjusted spray heads to water in right direction, checked and adjusted entire system with 10 stations.

Replaced faulty auto drain valve, tested system, repaired several drip line leaks in backyard, replaced 2 rotary heads and 2 spray heads that were leaking/broken, adjusted with proper height and nozzle, capped off one spray head in front yard that was not longer needed, cleaned up couple of clogged nozzles, adjusted spray heads and rotary heads to water in right direction, checked and adjusted entire system with 12 stations.

Dug up, tighten up shut off valve to system to make it stop, noticed that old AVB leaks just a tiny bit, advised customer to replace whole thing, checked all 3 stations.

Tested system, dug up, repaired and buried lateral line leak on zone 4 under shed that was damage per foundation crew working underneath shed, changed out 3 nozzles, water pooling in front is due normal run off, advised customer to set controller for less time and multiple times per day to avoid so much run off, cleaned up couple of clogged nozzles, checked and adjusted entire system with 6 stations.

Checking a Hunter system

Cleaning up the wiring while installing this new 12 station rain bird controller

Repaired frozen PVB under warranty, tested system, cleaned up couple of clogged nozzles, checked and adjusted entire system with 2 stations.

Located and replaced 1” valves on zones 4 and 7 that were stuck on, tested system, customer stated that he will replace broken heads himself, also master valve, valves on zones 2 and 5 and AVB are seeping constantly and need to be replace, customer request an estimate to complete repairs.

Dug up, repaired and buried 1” massive leak behind master valve that could have cause an increment in water bill, had to cut master valve out to be able to repair main line leak.

Dug up, repaired and buried 1” main line leak in backyard that was leaking constantly causing a wet spot in lawn and could have cause an increment increment in water bill, had to cut valves next to leak due lack of space, rebuilt 1” master valve that was leaking constantly causing a wet spot in front flower bed and could have cause an increment in water bill as well, tested system, cleaned up couple of clogged nozzles, adjusted spray heads to water in right direction, checked and adjusted entire system with 7 stations.

Checking a spray zone

Spring start up on an above ground backflow preventer

Tested system, dug up, repaired and buried 1” lateral line leak on zone 9, replaced rotary heads and spray heads as needed, adjusted with proper height and nozzle, did not replaced couple of heads close to driveway per customer request, checked and adjusted entire system with 13 stations.

Performed spring start up

Performed spring start up, repaired 1” mail line leak at PVB that was leaking previous winter shut down, tested system, adjusted spray heads to water in right direction, checked and adjusted entire system with 8 stations.

Performed spring start up, tested system, repaired damage to zones 1 and 2 cause per city contractors when replacing street, replaced one broken head on zone 6, set controller for proper watering schedule, cleaned up couple of clogged nozzles, adjusted spray heads and rotary heads to water in right direction, checked and adjusted entire system with 7 stations.

Performed spring start up, tested system, replaced two rotary heads that were not turning, adjusted with proper height and nozzle, cleaned up couple of clogged nozzles, adjusted spray heads and rotary heads to water in right direction, set controller for proper watering schedule, checked and adjusted entire system with 7 stations.